<< Back

Question ID: 13

I CAN'T GET THE ARROW KEYS TO ACTIVATE SO I CAN CALIBRATE THE INPUTS ON MY MICRISTAR?

If you have newer software in your Micristar you will have CF99 this needs to be changed to "E". If you don't have CF99, then you will have to add a jumper wire from Contact Input 8 to "C" (common) on the rear terminal board of your Micristar.


Submit A Question Submit A Question



ABOUT US | SERVICE | PRODUCT SALES | FAQ | CONTACT US | HOME

Exclusive manufacturer of Micristar Control Line
Copyright 2002 TMC Services, Inc. All Rights Reserved