<< Back

Question ID: 14

THE PROCESS VARIABLE (PV) READING ON MY MICRISTAR IS VERY UNSTABLE. I REPLACED THE THERMOCOUPLE AND CHECKED FOR BAD CONNECTIONS AND I STILL HAVE THE SAME PROBLEM. WHAT WOULD YOU SUGGEST?

Try putting the Micristar in the manual mode. If the problem still exists then I would say that the Input Module for that channel is bad (refer to Circuit Board Locations in the Micristar Manual). Input Module's can be replaced in the field if needed.


Submit A Question Submit A Question



ABOUT US | SERVICE | PRODUCT SALES | FAQ | CONTACT US | HOME

Exclusive manufacturer of Micristar Control Line
Copyright 2002 TMC Services, Inc. All Rights Reserved